Havly Soldering Kit
Havly Soldering Kit
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
Havly Soldering Kit
Collapsible row
Collapsible row
"Fixed four things the first weekend I owned it."
I bought this to repair one specific charging cable for a laptop I didn't want to replace. That took about ten minutes including watching a video on how to do it. Then I fixed the wire on a lamp my wife was about to throw out, resoldered a loose connection in my son's RC car, and repaired the headphone jack on a pair of studio headphones that had been in a drawer for two years. It gets hot fast and stays hot, which was my worry with something in this price range.
Heats up faster than the one I used in a shop class.
Under fifteen seconds, no exaggeration.
The stand and wick being included saved me another order.
Everything you need is in the box.
Temperature dial actually matters for small board work.
Low for electronics, high for thick wire.
Repaired my drone's motor wire in the field.
Would have been a $90 part.
Good first iron for learning. Nothing intimidating.
I'd never soldered before this.
Tips haven't corroded after months of use.
I keep them tinned and they still look new.
It isn't that you're bad at it.
The iron is losing heat faster than it makes it.
Most budget irons put the heating element outside the tip, wrapped around it. Heat has to travel through the metal before it reaches the joint — so the moment the tip touches something cold, the temperature drops and doesn't recover. That's when solder goes lumpy and grey instead of flowing, and beginners assume they did it wrong.
An internal element sits inside the tip, right where the work happens. Heat has nowhere to travel, so the temperature holds when it makes contact — and the solder flows the way it's supposed to on the first try.
Low for circuit boards and delicate components, high for thick wire and connectors that soak up heat.
Stand, solder wire, desoldering wick, tweezers and five tips — the things people forget to order.
Fine point for boards, chisel for wire. Swap without tools as the job changes.
Four steps, first time
Around 300°C for electronics, higher for thick wire.
Melt a little solder onto it. This is the step beginners skip.
Touch the tip to the wire for a second, then feed solder into it.
A good joint looks shiny and smooth, not grey and lumpy.
Throwing it out vs. fixing it
The Havly Soldering Kit is for you if…
Frayed charging cables and dead headphone jacks are the most common repair people make with their first iron, and both take under ten minutes.
Lamps, speakers, appliance wiring, RC cars, string lights — anything with a wire that came loose is repairable.
Adjustable temperature and an internal element make the first attempt far more forgiving than a cheap fixed-temp iron.
Motor wires and connectors fail constantly in these hobbies, and shipping a board out costs more than the kit.
The stand, wick, solder and tips are the pieces people forget. They're all in the box.
Why this kit wins
| Havly Soldering Kit | $10 Bare Iron | Soldering Station | Repair Shop | |
|---|---|---|---|---|
| Ready in under 15 seconds | ✓ | ✗ | ✓ | — |
| Holds temp under load | ✓ | ✗ | ✓ | — |
| Adjustable temperature | ✓ | ✗ | ✓ | — |
| Everything included | ✓ | ✗ | ~ | — |
| Portable, works anywhere | ✓ | ✓ | ✗ | ✗ |
| No per-repair cost | ✓ | ✓ | ✓ | ✗ |
Questions people ask first
I've never soldered before. Is this too advanced?
No. Adjustable temperature and a stable tip make it much more forgiving than a cheap fixed-temperature iron. Most people get a clean joint within a few tries.
What temperature should I use?
Around 300–350°C for electronics and circuit boards, and 380–420°C for thick wire or connectors that pull heat away quickly.
What's in the box?
The iron, five interchangeable tips, a stand, solder wire, desoldering wick, and tweezers.
Can it handle circuit board work?
Yes. Use the fine conical tip at a lower temperature for board-level components.
How long does it take to heat up?
Under 15 seconds to working temperature.
Are replacement tips easy to find?
Yes, it uses a standard tip size, and five are included to start.
What if I don't like it?
30 days, full refund, no explanation needed.
GUARANTEE
Fix one thing with it. That's the test.
Repair a cable, a lamp, a pair of headphones — whatever's been sitting in the drawer. If it doesn't heat the way this page says or you can't get a clean joint, email us within 30 days for a full refund.